-40%
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L
28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L

28'' Radiator for Chevy Silverado Suburban Tahoe GMC Sierra Yukon 4.3 4.8 5.3L

$ 36.96

  • Brand: LEDKINGDOMUS
  • Engine Oil Cooler: Not Included
  • Features: 100% Leak Tested, Crossflow Radiator, Durability Tested
  • Fitment Type: Direct Replacement
  • Inlet Diameter: 1-5/16Inch
  • Interchange Part Number: CU2334, DPI2334, RAD2334, 15193110, 52484047
  • Item Height: 28-1/4 Inch
  • Item Length: 17-1/4 Inch
  • Item Width: 1 Inch (Core Thickness)
  • Manufacturer Part Number: BEYSH0006541BE
  • Manufacturer Warranty: Lifetime
  • Material: Aluminum
  • Notice: The core length is 28'', NOT FOR 34''
  • Outlet Diameter: 1-9/16 Inch
  • Placement on Vehicle: Engine Compartment, Front
  • Row Count: 1 Row
  • Superseded Part Number: 2334, Q2334, 52486598, GM3010
  • Transmission Oil Cooler: Included
  • Type: Radiator
  • UPC: 652069464622
  • gtin13: 652069464622

Description

28 inch Radiator for Checy / GMC Item Description: Please Notice: The length of the core is 28'' Because there are 2 size radiator fit for these same vehicles, please confirm your old radiator is 28", NOT 34''. Fit For: 2002 - 2005 Cadillac Escalade 5.3L (Not for 6.0L) 1999 - 2012 Chevrolet Silverado 1500 4.3L, 4.8L, & 5.3L (Not for 6.0L or 6.2L) 2013 Chevrolet Silverado 1500 4.8L, & 5.3L (Not for 4.3L, 6.0L or 6.2L) 2007 Chevrolet Silverado 1500 Classic 4.8L, & 5.3L (Not for 4.3L, 6.0L or 6.2L) 1999 - 2013 Chevrolet Silverado 2500 4.8L & 5.3L (Not for 5.7L or 6.0L) 2000 - 2006 Chevrolet Suburban 1500 5.3L (Not for 5.7L or 6.0L) 2000 - 2006 Chevrolet Tahoe 4.8L & 5.3L (Not for 5.7L) 1999 - 2004 GMC Sierra 1500 4.3L, 4.8L, & 5.3L (Not for 6.0L) 2005 - 2006 GMC Sierra 1500 4.8L, & 5.3L (Not for 4.3L or 6.0L) 2007 GMC Sierra 1500 Classic 4.8L, & 5.3L (Not for 4.3L, 6.0L) 1999 - 2000 GMC Sierra 2500 5.3L & 6.0L 2000 - 2006 GMC Yukon 4.8L & 5.3L (Not for 5.7L or 6.0L) 2000 - 2006 GMC Yukon XL 1500 5.3L (Not for 6.0L) Note: 1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value. 2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure. 3. The radiator fan does not turn, resulting in high temperature in the water tank. 4. Drain the air from the cooling system. Refer to the user manual or repair manual. 5. Please refer to owner's manual to add coolant. 6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns. 7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood. 8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries. 9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure. Interchange part number: 2334, Q2334 , CU2334 , DPI2334 , RAD2334 , 15193110, 52484047, 52486598, GM3010 Row Count: 1 Row Core Dimension: 28 x 17-1/4 inches Core Thickness: 1 inch Transmission Oil Cooler: Yes Engine Oil Cooler: NO The Oil cooler connector is Fast connector. Here we provide 2 methods for you to install it: 1. Remove the original mount, insert the tube, and tighten the nut at the tip of tube. 2. The nut at the end of the tube is not needed, move it away from the tip. Next, insert the tube to the mount and push it to the bottom. The snap spring on the mount will keep the tube intact. More Display: